How to modify Bulls Eye LNB to inject 25MHz signal.
I am not going to explain basics – if you are here you probably know why I do it. So,
Continue readingHow to modify Bulls Eye LNB to inject 25MHz signal.
Pawel Rozenek's Website
I am not going to explain basics – if you are here you probably know why I do it. So,
Continue readingHow to modify Bulls Eye LNB to inject 25MHz signal.
Disclaimer: I do not take any responsibility in case something goes wrong with your device. There is a small chance
When I do my mechanical and electronic radio (and not only) projects, I always try to design everything in Solidworks,
This mod is based on the TP-Link Archer AX53 (AX3000 Gigabit WiFi 6), however it will be very similar if
Continue readingHow to add external antenna to your WiFi router
If the Pluto does not respond anymore, one of the option to unbrick it is: 4. Download unofficial dirty firmware
Few days ago I bought a Yagi antenna switch supposed to work as WiFi directional antenna. I am personally going
QO-100 is an amateur geostationary satellite having two transponders: In this article we will talk ONLY about the narrow band
Continue readingAmateur Geostationary Satellite – first steps with QO-100 Es’hail 2
Just recently I decided to play a bit with ham radio amateur satellites – I have never done in it
Continue readingWorking through amateur satellites – how to make a very cheap antenna rotator
Currently I use Gpredict which is a bit outdated software to control my Sarcnet rotator. I used to control Sarcnet
I decided to upload my personal WSJT-X FT8 software configuration, so in case I get my settings lost I will