This is a webpage of the GB7FT,
DMR BRANDMEISTER repeater
in Portsmouth, Fratton, UK
Keeper: Pawel Rozenek, M0PPR
- Repeater output: 439.7125 MHz (you need to listen here)
- Repeater input: 430.7125 MHz (you need to transmit here)
- TX: Motorola GM360, power 5W, ERP: 10.5dBW
- RX: Motorola GM360
- Colour code 3
- Antenna Diamond X510N 11.7dBi (9.55dBd), 8m above ground level, 15m above the sea level
- Raspberry Pi 3 B+
- MMDVM from BI7JTA
Location: Fratton, Portsmouth, UK, IO90LT
ETCC Region: South-West
RSGB Region 10
Current slot settings (likely will change):
| SLOT 1 | SLOT 2 |
| TG235 (UK) | TG2350 (UK) |
Please use TalkGroups 2351, 2352, 2353 on slot 2, all other groups on slot 1
JUST SIMPLY ASK IF YOU WANT ME TO ADD ANY TG
Unfortunately the antenna is situated just at the top of my house’s roof so it does not provide a great coverage. But it is still better than nothing! And the repeater provides a very good coverage inside of Portsmouth, when I walk with my handheld radio.
Repeater restarts automatically every night 03:00 AM … 03:01AM
Link to repeater’s Pi-Star page: http://gb7ft.rozenek.com:666
Link to Facebook Group: https://www.facebook.com/groups/gb7ft/
QRZ: https://www.qrz.com/db/GB7FT
RSGB: https://ukrepeater.net/my_repeater.php?id=4631
Brandmeister: https://brandmeister.network/?page=device&id=234027
Predicted coverage – see the map below:
…and the latest stage 6 🙂 :
Good day from scotland.
Would you allow a visiting ham to use your repeater to call back to edinburgh .
Partners son (2m1) is working on a boat working from around your location .
What is the best reflector to call into you
I try to listen on Brandmeister 2350 (M0PPR) but you can send me an email to pawel@rozenek.com too.