![](https://www.rozenek.com/wp-content/uploads/2019/01/print-bed-chain-for-geeetech-i3-pro-w.png)
Just to save cables I decided to 3d print a cable chain. All stl files can be printed without supports. The chain will be printed in one piece, needs a bit of force to brake it. If you decide to print it I do not take any responsibility for any problems.
![](https://www.rozenek.com/wp-content/uploads/2019/01/6-plus-chain-bits.png)
The first file is a stiff bit of the chain. Print on the side so no supports needed. File is here.
![](https://www.rozenek.com/wp-content/uploads/2019/01/10-chain-bits.png)
Then you need 13 chain bits. In the stl file there is 10 so you need to print the file twice. File is here.
![](https://www.rozenek.com/wp-content/uploads/2019/01/chain-bracket-lower.png)
Chain-bracket-lower file is here.