739MHz Helical Filter for QO-100
The small introduction. I am radio amateur operator transmitting signals at 2.4GHz band into the geostationary amateur satellite QO-100. I
Pawel Rozenek's Website
The small introduction. I am radio amateur operator transmitting signals at 2.4GHz band into the geostationary amateur satellite QO-100. I
I hate Icom IC-9700 for that. They blocked not only transmitting (which is fine) but also receiving anything outside ham
The small introduction. I am radio amateur operator transmitting signals at 2.4GHz band into the geostationary amateur satellite QO-100. I
I am not going to explain basics – if you are here you probably know why I do it. So,
Continue readingHow to modify Bulls Eye LNB to inject 25MHz signal.
Disclaimer: I do not take any responsibility in case something goes wrong with your device. There is a small chance
When I do my mechanical and electronic radio (and not only) projects, I always try to design everything in Solidworks,
This mod is based on the TP-Link Archer AX53 (AX3000 Gigabit WiFi 6), however it will be very similar if
Continue readingHow to add external antenna to your WiFi router
If the Pluto does not respond anymore, one of the option to unbrick it is: 4. Download unofficial dirty firmware
Few days ago I bought a Yagi antenna switch supposed to work as WiFi directional antenna. I am personally going
QO-100 is an amateur geostationary satellite having two transponders: In this article we will talk ONLY about the narrow band
Continue readingAmateur Geostationary Satellite – first steps with QO-100 Es’hail 2